H&P, Inc.
    • Why H&P
    • HSE
    • Performance Results
    • Types of Drilling
    • Performance Based Contracts
    • Advanced Well Engineering
    • Survey Management
    • Land Rigs
    • FlexRig® Fleet
    • T-Series Fleet
    • Automation
    • Rig Equipment
    • Rig Floor
    • Drilling
    • Offshore Drilling
    • Where We Drill
  • Technologies
  • Resources
    • About H&P
    • Leadership
    • Our People
    • Community Investment
    • Sustainability
  • Investor Hub
  • News & Insights
  • Find a Job
Get in touch
Did you know?

In the last 10 years in US Land H&P has drilled approximately 600 million feet.

That is nearly 24 times around the earth!

Did you know?

In the last 10 years in US Land H&P has drilled approximately 600 million feet.

That is over halfway to the moon!

Did you know?

In the last 10 years in US Land H&P has drilled approximately 600 million feet.

That’s enough to drill deeper than Mount Everest… 68,000 times 

Did you know?

In the last 10 years in US Land H&P has drilled approximately 600 million feet.

That is a straight line from New York to LA – 43 times! 

Did you know?

Crew members are rewarded for submitting safety observations and intervening if they see risky situations. Actively C.A.R.E.® is more than just a tagline.

Did you know?

Our vertically integrated model includes global manufacturing, enabling faster rig deployment and consistent quality across continents.

Did you know?

H&P has drilled more wells, with more data than the largest operators combined.

Did you know?

Our SSHE reporting system captures and mitigates potential SIFs before they occur, reinforcing a culture of proactive safety

Did you know?

H&P customers drilling 10 wells save an average of 24 days and over $1.5 million compared to competitors, due to fewer trips, less NPT, and faster cycle times. 

Did you know?

Our Real-Time Operations Centers monitor and optimize drilling performance around the clock, preventing issues before they occur.

Did you know?

We lead the industry with 2,500+ rig years of AC drive experience—delivering smoother, more efficient drilling across all geologies.

Did you know?

Even as footage drilled continues to rise, H&P has reduced emissions intensity by 33% since 2018.

Did you know?

In 2024, Survey Management corrected almost 900K surveys.

Did you know?

In 2024, StallAssist® technology mitigated over 25K stalls.

Did you know?

In 2024, AutoSlide® technology slid for over 885K feet. That’s like stacking 1,770 Eiffel Towers on top of each other.

Did you know?

In 2024, Autodriller Pro drilled almost 30k feet, or about 83 American football fields.

Did you know?

In 2024, FlexFusion® technology automated 1.5+ million processes on almost 4k wells.

View all results →

No results

Resources

Technical Paper


  • Advanced Well Engineering
  • Autodriller Pro Control System
  • Automated HSE Systems
  • AutoSlide® technology
  • Bit Guidance System
  • Digital Roadmap® technology
  • FlexB2D® 2.0 technology
  • FlexFusion™ technology
  • FlexOscillator® technology
  • FlexRobotics(TM)
  • FlexTorque® technology
  • FlexVision Camera Suite
  • Power Management
  • Rig Floor Automation
  • StallAssist® technology
  • Survey Management
  • Technical Paper

    Combining Downhole Axial and Surface Oscillation Tools, What Are the Consequences on Tool Face Control Performance?

    Abstract When drilling in sliding mode, axial oscillation tools (AOT) and surface oscillation tools (SOT) are two possible solutions that are used in the industry…

  • Technical Paper

    Ensuring Success of Complex Liner Deployment Over Complete Field Development Campaign

    Abstract This paper describes the innovative engineering workflow which has been used to ensure the safe deployment of deep production liners on long step-out wells…

  • Technical Paper

    Fatigue Tracking for Mud Motors and MWDs in Unconventional Wells

    Abstract As the industry continues to drill increasingly complex wells, the demand put on drilling equipment has increased and will continue to increase. Preventive maintenance…

  • Technical Paper

    Fluid Circulation Effects on Torque and Drag Results, a New Take on an Old Subject

    Abstract The hydraulic effects on torque and drag modelling have been thoroughly studied in the past, yet their interpretation still causes a lot of misunderstandings…

  • Technical Paper

    Foothills Drilling Performance Improvement – A New Transversal Approach

    Abstract Total E&P initiated a drilling campaign in 2018 near the foothills of Bolivia where wells can be extremely challenging and lengthy to drill. These…

  • Technical Paper

    How Drillstring Rotation Affects Critical Buckling Load?

    Abstract Buckling of tubulars inside wellbores has been the subject of many researches and articles in the past. However, these conservative theories have always followed…

  • Technical Paper

    How Motor Bend Affects Stick-Slip Vibrations: Modeling and Case Study

    Abstract Contact friction along drill string is one of root causes of stick-slip vibrations, especially when drilling an unconventional well with a long lateral section.…

  • Technical Paper

    How the Bit Profile and Gages Affect the Well Trajectory

    Abstract The importance of wellbore deviation is well recognized by the drilling industry. An analysis of the directional behavior of a drilling system must include…

  • Technical Paper

    Improving Surface Oscillation Tools Performance Using Time-Domain Dynamics and Torque and Drag Models

    Abstract Overcoming friction in sliding mode represents a challenging task when drilling an unconventional well with a long lateral section. Among the possible ways to…

  • Technical Paper

    Learning Curve Benefits Resulting From the Use of a Unique BHA Directional Behavior Drilling Performances Post-Analysis

    Abstract With the current market’s high prices for drilling units and sophisticated directional and formation assessment services, low systems reliability or poor directional performance in…

  • Technical Paper

    Micro Dogleg Detection with Continuous Inclination Measurements and Advanced BHA Modeling

    Abstract Micro doglegs are a natural effect of any vertical or directional well that can explain a wide variety of down hole problems, from additional…

  • Technical Paper

    Nonlinear Dynamics of a Drillstring Immersed in a 3D Curved Well, Simulations and Experiments

    Abstract During drilling operations, the bit-rock and drillstring-wellbore contacts with stick-slip phenomena, fluid structure interaction, and mass unbalances distributed along the drillstring yield nonlinear dynamics…

Get in touch

Over a century of innovation, performance, 
and precision in drilling.

  • Supplier Information
  • Careers
  • Investor Hub
  • Employee Login
  • Customer Login
Did you know?

In the last 10 years in US Land H&P has drilled approximately 600 million feet.

That is nearly 24 times around the earth!

Did you know?

In the last 10 years in US Land H&P has drilled approximately 600 million feet.

That is over halfway to the moon!

Did you know?

In the last 10 years in US Land H&P has drilled approximately 600 million feet.

That’s enough to drill deeper than Mount Everest… 68,000 times 

Did you know?

In the last 10 years in US Land H&P has drilled approximately 600 million feet.

That is a straight line from New York to LA – 43 times! 

Did you know?

Crew members are rewarded for submitting safety observations and intervening if they see risky situations. Actively C.A.R.E.® is more than just a tagline.

Did you know?

Our vertically integrated model includes global manufacturing, enabling faster rig deployment and consistent quality across continents.

Did you know?

H&P has drilled more wells, with more data than the largest operators combined.

Did you know?

Our SSHE reporting system captures and mitigates potential SIFs before they occur, reinforcing a culture of proactive safety

Did you know?

H&P customers drilling 10 wells save an average of 24 days and over $1.5 million compared to competitors, due to fewer trips, less NPT, and faster cycle times. 

Did you know?

Our Real-Time Operations Centers monitor and optimize drilling performance around the clock, preventing issues before they occur.

Did you know?

We lead the industry with 2,500+ rig years of AC drive experience—delivering smoother, more efficient drilling across all geologies.

Did you know?

Even as footage drilled continues to rise, H&P has reduced emissions intensity by 33% since 2018.

Did you know?

In 2024, Survey Management corrected almost 900K surveys.

Did you know?

In 2024, StallAssist® technology mitigated over 25K stalls.

Did you know?

In 2024, AutoSlide® technology slid for over 885K feet. That’s like stacking 1,770 Eiffel Towers on top of each other.

Did you know?

In 2024, Autodriller Pro drilled almost 30k feet, or about 83 American football fields.

Did you know?

In 2024, FlexFusion® technology automated 1.5+ million processes on almost 4k wells.


© 2025 Copyright Helmerich & Payne, Inc.
  • Privacy & Settings
  • Disclaimer
  • Facebook
  • Instagram
  • LinkedIn
  • X
  • YouTube

Notifications